Nerūsējošā tērauda margu kabeļu margu sistēma
Produkta apraksts
7 × 19 nerūsējošā tērauda stiepļu troses specifikācija:
| Struktūra | Virves diametrs mm | kg/1000m | Minimālais pārrāvuma spēks N | Minimālais lūšanas spēks kg |
| 7×19 | 2.5 | 25 | 4410 | 450 |
| 3 | 36 | 6370 | 650 | |
| 3.2 | 40.96 | 7850 | 801 | |
| 4 | 64 | 8620 | 880 | |
| 4.5 | 81 | 12250 | 1250 | |
| 4.8 | 92.16 | 16510 | 1685 | |
| 5 | 100 | 16660 | 1700 | |
| 5.6 | 125.44 | 22250 | 2270 | |
| 6 | 144 | 23520 | 2400 | |
| 6.4 | 163.84 | 28500 | 2908 | |
| 8 | 256 | 40000 | 4082 | |
| 9 | 324 | 46000 | 4694 | |
| 9.5 | 361 | 53400 | 5449 | |
| 10 | 400 | 54000 | 5510 | |
| 12 | 576 | 73000 | 7449 | |
| 13 | 676 | 82000 | 8367 | |
| 14 | 784 | 89000 | 9082 | |
| 16 | 1024 | 124000 | 12653 | |
| 18 | 1296 | 157000 | 16020 | |
| 20 | 1600 | 194000 | 19796 | |
| 22 | 1936 | 235000 | 23980 | |
| 24 | 2304 | 280000 | 28571 | |
| 26 | 2704 | 328000 | 33469 | |
| 28 | 3136 | 381000 | 38878 | |
| 30 | 3600 | 437000 | 44592 | |
| 32 | 4096 | 497000 | 50714 | |
| pieejams cits diametrs un konstrukcija | ||||
collu uz mm konvertēšanas tabula ( 1 pēda = 12 collas; 1 colla = 25,4 mm):
| collu | mm | collu | mm | collu | mm | collu | mm | ||||||||||||||||
| 1/2 | 0.5 | 12.7 | 3/32 | 0.09375 | 2.381 | 3/64 | 0.046875 | 1.191 | 35/64 | 0.546875 | 13.891 | ||||||||||||
| 1/4 | 0.25 | 6.35 | 5/32 | 0.15625 | 3.969 | 5/64 | 0.078125 | 1.984 | 37/64 | 0.578125 | 14.684 | ||||||||||||
| 3/4 | 0.75 | 19.05 | 7/32 | 0.21875 | 5.556 | 7/64 | 0.109375 | 2.778 | 39/64 | 0.609375 | 15.478 | ||||||||||||
| 1/8 | 0.125 | 3.175 | 9/32 | 0.28125 | 7.144 | 9/64 | 0.140625 | 3.572 | 41/64 | 0.640625 | 16.272 | ||||||||||||
| 3/8 | 0.375 | 9.525 | 11/32 | 0.34375 | 8.731 | 11/64 | 0.171875 | 4.366 | 43/64 | 0.671875 | 17.066 | ||||||||||||
| 5/8 | 0.625 | 15.875 | 13/32 | 0.40625 | 10.319 | 13/64 | 0.203125 | 5.159 | 45/64 | 0.703125 | 17.859 | ||||||||||||
| 7/8 | 0.875 | 22.225 | 15/32 | 0.46875 | 11.906 | 15/64 | 0.234375 | 5.953 | 47/64 | 0.734375 | 18.653 | ||||||||||||
| 1/16 | 0.0625 | 1.588 | 17/32 | 0.53125 | 13.494 | 17/64 | 0.265625 | 6.747 | 49/64 | 0.765625 | 19.447 | ||||||||||||
| 3/16 | 0.1875 | 4.763 | 19/32 | 0.59375 | 15.081 | 19/64 | 0.296875 | 7.541 | 51/64 | 0.796875 | 20.241 | ||||||||||||
| 5/16 | 0.3125 | 7.938 | 21/32 | 0.65625 | 16.669 | 21/64 | 0.328125 | 8.334 | 53/64 | 0.828125 | 21.034 | ||||||||||||
| 7/16 | 0.4375 | 11.113 | 23/32 | 0.71875 | 18.256 | 23/64 | 0.359375 | 9.128 | 55/64 | 0.859375 | 21.828 | ||||||||||||
| 9/16 | 0.5625 | 14.288 | 25/32 | 0.78125 | 19.884 | 25/64 | 0.390625 | 9.922 | 57/64 | 0.890625 | 22.622 | ||||||||||||
| 11/16 | 0.6875 | 17.463 | 27/32 | 0.84375 | 21.431 | 27/64 | 0.421785 | 10.716 | 59/64 | 0.921875 | 23.416 | ||||||||||||
| 13/16 | 0.8125 | 20.638 | 29/32 | 0.90625 | 23.019 | 29/64 | 0.453125 | 11.509 | 61/64 | 0.953125 | 24.209 | ||||||||||||
| 15/16 | 0.9375 | 23.813 | 31/32 | 0.96875 | 24.606 | 31/64 | 0.484375 | 12.303 | 63/64 | 0.984375 | 25.003 | ||||||||||||
| 1/32 | 0.03125 | 0.794 | 1/64 | 0.01562 | 0.397 | 33/64 | 0.515625 | 13.097 | 64/64 | 1 | 25.4 | ||||||||||||
| Parasto nerūsējošā tērauda marku ķīmiskais sastāvs | ||||||||
| % | ||||||||
| Komponents | C | Si | Mn | P | S | Kr | Ni | Mo |
| 304 | MAX 0,08 | MAX 1,00 | MAX 2.00 | MAX 0,045 | MAX 0,03 | 17.00-19.00 | 8.00-10.00 | |
| 304L | MAX 0,03 | MAX 1,00 | MAX 2.00 | MAX 0,045 | MAX 0,03 | 18.00-20.00 | 8.00-10.00 | |
| 316 | MAX 0,08 | MAX 1,00 | MAX 2.00 | MAX 0,045 | MAX 0,03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 |
| 316L | MAX 0,03 | MAX 1,00 | MAX 2.00 | MAX 0,045 | MAX 0,03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 |
pildīta ar cietu, stipru saplākšņa spoli, spoli, spoli. pārklāts ar caurspīdīgu plastmasu, lai izvairītos no ūdens vai netīrumiem
piegādes zīme kā klienta prasība
1000m/spole 1500m/spole 2000m/spole 2500m/spole 3000m/spole un cits garums pēc Jūsu izvēles
Q1. Where is your factory ?
A1: Our company’s processing center is located in Shanghai, China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to the customers’ needs.
Q2. What are your company’s main products ?
A2: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.
Q3. How do you control quality ?
A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.
Q4. What are the advantages of your company ?
A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.
Q5. How many coutries you already exported ?
A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran, Turkey, Jordan, India, etc.
Q6. Can you provide sample ?
A6: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days.
Latvian 
English 
Czech 
Arabic 
Danish 
German 
Greek 
Spanish 
French 
Indonesian 
Italian 
Japanese 
Dutch 
Portuguese 
Romanian 
Russian 
Swedish 
Thai 
Chinese 
Atsauksmes
Pašlaik atsauksmju nav.